Home > Used Cisco Switches >

S5735S-L24P4S-A Gigabit 100Mbps Sfp+ Enhanced Network Switch

Product Categories

Shenzhen Bo-Net Technology Co., Ltd.

Contact Now

Name: S5735SL24P4SA Gigabit 100Mbps Sfp Enhanced Network Switch
Brand: Huawei
Price: 1 USD

Brand Name : Huawei

Model Number : S5735S-L24P4S-A

Place of Origin : USA

MOQ : 1 unit

Payment Terms : L/C, D/A, D/P, T/T, Western Union, MoneyGram,PayPal,Alipay

Supply Ability : 100pcs per week

Delivery Time : 1-2 work days

Packaging Details : Original Cisco Packing

Brand : HUAWEI

Model : S5735S-L24P4S-A

ports : 24

Type : Switch

Fixed Por : 10/100/1000Mbps

Contact Now

1	Twenty-four PoE+ 10/100/1000BASE-T ports	2	Four 1000BASE-X ports Applicable modules: * GE optical module * GE-CWDM optical module * GE-DWDM optical module * GE copper module * 10GE SFP+ optical module (only used for stack connection, OSXD22N00 not supported, applicable in V200R019C10 and later versions) * 1 m and 3 m SFP+ high-speed copper cables (only used for stack connection, applicable in V200R019C10 and later versions) * 3 m and 10 m SFP+ AOC cables (only used for stack connection, applicable in V200R019C10 and later versions) * 0.5 m and 1.5 m SFP+ dedicated stack copper cables (used for zero-configuration stacking, applicable in V200R019C10 and later versions)
3	One console port	4	One ETH management port
5	One USB port	6	One PNP button NOTICE: To restore the factory settings and reset the switch, hold down the button for at least 6 seconds. To reset the switch, press the button. Resetting the switch will cause service interruption. Exercise caution when you press the PNP button.
7	Ground screw NOTE: It is used with a ground cable.	8	Jack for AC power cable locking strap NOTE: The AC power cable locking strap is not delivered with the switch.
9	AC socket NOTE: It is used with an AC power cable.	-	-

Item	Description
Memory (RAM)	1 GB
Flash	512 MB in total. To view the available flash memory size, run the display version command.
Service port surge protection	Common mode: ±7 kV
Power supply surge protection	±6 kV in differential mode, ±6 kV in common mode
Dimensions (H x W x D)	* Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 220.0 mm (1.72 in. x 17.4 in. x 8.7 in.) * Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 442.0 mm x 227.0 mm (1.72 in. x 17.4 in. x 8.94 in.)
Weight (with packaging)	4.31 kg (9. lb)
Stack ports	Any 10/100/1000BASE-T ports or 1000BASE-X ports (applicable in V200R019C10 and later versions)
PoE	Supported
Rated voltage range	* AC input: 100 V AC to 240 V AC, 50/60 Hz * High-Voltage DC input: 240 V DC
Maximum voltage range	* AC input: 90 V AC to 290 V AC, 45 Hz to 65 Hz * High-Voltage DC input: 190 V DC to 290 V DC
Maximum power consumption (100% throughput, full speed of fans)	* Not providing the PoE function: 53 W * 100% PoE loads: 451 W (PoE: 380 W)
Typical power consumption (30% of traffic load) * Tested according to ATIS standard * EEE enabled * No PoE power consumption	39 W

S5735S-L24P4S-A Gigabit 100Mbps Sfp+ Enhanced Network Switch

Product Tags:

100Mbps Sfp+ Enhanced Network Switch

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Shenzhen Bo-Net Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!